Probe Regulator - Potentia Enigneering

Sample Handling System

Probe Regulator

Liquid carryover from the pipeline into the sample conditioning system should be prevented when sampling natural gas as it can directly impact the accuracy of compositional analysis and also damage the analyzer. Our probes provide a means to separate unwanted liquid and particulate from the gas sample at the flowing pressure and temperature conditions, in compliance with industry standards.

Probe Regulator

The safest and most versatile probe available on the market.

The two piece probe regulator consists of a housing containing a foot valve on its lower end and a membrane tip probe regulator. The probe housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange. Once the probe is inserted into the housing, the foot valve opens to allow pipeline gas to flow freely through the membrane. Sample pressure is then reduced immediately downstream of the membrane inside of the pipeline. The heat then transfers from the pipeline to the regulator to prevent excessive Joule Thomson Cooling during pressure regulation. Retracting the probe from the housing closes the foot valve, making it possible to perform probe maintenance without depressurizing the pipeline. Our specialized probe regulator allows probe maintenance without line depressurization and is AP14.1, GPA 2166 and ISO10715 probe compliant.

Adjustable Length Probe

The safest and most versatile probe available on the market.

Our specialized probe is offered with both threaded and flanges process conditions, exotic materials of construction and optional coatings. Adjustable Length Probe can be mounted vertically or horizontally and its installation process is simple and straightforward. Its unique one-piece body design with double mechanical safety interlocks to prevent the probe from self-retracting under aby failure scenario. A thread die cleans the probe’s thread to ensure proper engagement with mating parts, providing for a smooth retraction even after extended periods of service. Our probe assembly option is available for gas sampling applications where a membrane tipped probe cannot be used.

Measurement and Analytics

Sample Handling System

Filters

High Performance Filters providing the utmost flexibility for coalescing/particulate filtration needs

Flow Meters

Corrosion Resistant diaphragm sample gas pumps Corrosion Resistant compact area flowmeters used for continuous extractive gas analytics.

Heater & Coolers

Many applications require effective and efficient heat control. Our sample gas heaters and coolers recover up to 90% of the

Pressure Regulators

Our Heated Joule Thomson Regulator is a revolutionary product containing four stages of heated pressure regulation in one 316 stainless

Probe Regulator

Liquid carryover from the pipeline into the sample conditioning system should be prevented when sampling natural gas as it can

Pumps

Corrosion Resistant diaphragm sample gas pumps

Tubing & Fittings

Our pipe fittings and tubings are available in a variety of sizes, materials and configurations. Our range includes pipe connectors

Valves

Analytical Valves in an online Gas Chromatograph are critical to reliability and performance. Ensuring a precise sample inject and directing

Potentia brings together technology and engineering to produce a world of solutions for the benefit of out customers.

USA - 5511 Parkcrest Drive Suite 103 Austin, TX 78731
UAE - FDRK2920 Compass Building, Al Shohada Road, Al Hamra Zone-FZ, Ras Al Khaimah
BANGLADESH - B1, Road 11, Sector 10 Uttara West Dhaka 1230
PAKISTAN - 2nd Floor, 285-Q Block Commercial Area D.H.A Phase-II, Lahore

Our Companies

© All rights reserved by POTENTIA